PSE
極致性能,超高精度裁剪模范,將生產效率提升至新高度
Extreme preformance,ultra-high precision cutting model,
improve production efficiency to a new level.
▇ 特點
Features
一、雙刀盤/雙冷卻系統∶
1、雙刀盤為大小刀盤,大刀盤為了穩定面料,減少裁割中推?料的情況出現。
2、小刀盤減少跟面料的接觸,使得裁割中剪口,轉?更流暢,裁片線段更完善。
3、風冷可以直接通過大刀盤近距離冷卻刀片,使冷風直接作用于刀片,有效解決刀片發熱容易黏膠的問題。
Double cutter bottoms/double cooling system:
1.There are large and small two cutter bottoms,large one is to stabilize the fabric and reduce the possibility of pushing fabric during cutting.
2.Small cutter bottom can reduce the touch with the fabric,in order to have a smoother notch and corners,and make more perfect cu?ng edge.
3.Cooling air can directly cool the knife in a close distance through the large cutter bottom,so that the cold air can cool the knife directly,which can solve knife heating and
sticking problem effectively.
二、裁刀冷卻裝置∶
1、雙槍入刀盤,可以使刀盤迅速冷卻,刀盤迅速結霜。
2、單槍入刀盤油氣混合,利用油霧潤滑刀鋒,讓刀片裁剪重膠質裁片時,不會造成粘膠。
3、單槍入刀盤油氣混合,外加冷風槍噴嘴,全方位讓刀刃刀身冷卻。
1.Double guns into the cutter bottom can cool the cutter bottom quickly and make the cutter bottom frost quickly.
2.Single gun into the cutter bottom with mixed silicone air,and the blade is lubricated with oil mist,sothat the blade won’t stick when cut high polyester composition fabric.
3.Single gun into the cutter bottom with mixed silicone air,and add with cold air gun nozzle which can cool the blade in all direc tions.
三、高效裁頭∶
最高轉速5000r/min,最大切割速度可達60M/min,大幅提升裁剪效率;
High-efficiency cutting head:The maximum speed is 5000r/min,the maximumcutting speed can reach 60M/min,which greatly improves the cutting efficiency;
四、智能磨刀:
能利用裁頭移動時進行磨刀,解決了傳統裁床需要在停?狀態下才能磨刀的行業痛點。 該技術在具備極高磨刀效率的同時,兼顧省刀、砂帶使用成本低的優勢;
Intelligent knife sharpening:It can sharpen the knife when the cutting head is shifted,which solves the industry's pain point that the traditional cutting machine needs to sharpen the knife in a positive state.This technology not only has extremely high grinding efficiency,but also takes into account the advantages of saving knives and low cost of using abrasive belts;
五、定刀裝置∶
可隨面料高度控制刀盤刀度,防止易滑面料拖拉,實現精準裁剪;
Knife setting device:cutter bottom height can be adjusted according to the fabric height to prevent pushing slippery fabric,and achieve precise cutting
六、穩定的機械電氣系統∶
一體成型機身,具備極高的鋼性;配備智能伺服控制系統,采用國際知名電氣品牌原件,穩定、高效。
Stable mechanical and electrical system:One-piece body with high rigidity;equipped with intelligent servo control system,It adopts original international famous electric brand, which is stable and efficient.
▇ 標配裝置
Standard quipment
1、智能磨刀系統
Intelligent Blade grinding sysem
2、高效裁頭
High-efiiciency cutting system
3、定刀裝置
KixedKnife Device
4、真空壓力系統
Vacuum pressure system
5、帶氣過窗技術
Conveyor With Vacuum Adsorption Technology
6、人機交互系統
Human-computer interaction system
7、雙刀盤/雙冷卻系統
Double cutter bottoms/double cooling system
▇ 選配裝置
OptionalDevice
1、空芯單打孔裝置
SingleHollowPunching Device
2、物聯網裝置
IoTDevice
型號 Model | P5S-2025 | 可定制(Customize) | ||
裁剪高度 Working Width | 5CM | |||
工作寬度 Cutting Widow Length | 1600mm | 2500mm | 2600mm | 可定制(Customize) |
裁剪窗口長度 Unload Conveyer Length | 2000mm | 2500mm | 3300mm | 可定制(Customize) |
揀料傳送長度 SmartSharpening method | 2000mm | 2500mm | 3300mm | 可定制(Customize) |
裁剪刀智能 | 納米級感應控制 Nano-scale induction control | |||
磨刀方式 power supply | 砂帶磨刀 Belt sharpening | |||
最高行走速度 air flow volume | 100m/min | |||
電源 Air pressure | 5P/380V/50Hz | |||
氣流量 Maximum power | 500L/min | |||
最大功率 Total equipment weight | 30KW | |||
設備總重 cutting hight Cutter | 3800KG |
Copyright ? 中山博奕智能科技有限公司 版權所有備案號:粵ICP備2021151550號